Rain Today Rained Yesterday Too Probably Rain Again Tomorrow
Author
Reply to Pattie Lessel
What stain brand and type did you use? Post some pics in the comments.
This was posted as an answer to question. This is not the correct reply. They asked about a porch that has a roof.
Author
Respond to Cher
Sad but we do not understand your comment.
How tin can we cleaned a stained deck
Volition hitting the deck piece of work on a stained deck with blackness mould on it
Author
Respond to Barbara
Nosotros do not understand your question.
7 months agone
And so I cleaned and brightened my deck simply the last week has had some random calorie-free showers, so I haven't had the 72 minimum window to let the deck dry, stain and cure before more rain comes.
I was wondering whether I could get some plastic sheeting to cover the deck and rail when I know it'south going to pelting then that the deck doesn't get soaked again and I can uncover it when it's nice enough to allow it to go along drying or even start staining if it'south already dry out at that indicate?
Author
Answer to Michael Lanich
Exercise non cover it. But allow it dry out for 48 hours after pelting earlier staining.
Hi,
Deck stain was applied yesterday. Every bit it's drying, I am noticing the following:
one. some lines in a portion of the deck
2. some fuzzies and white residue – these came about during the prep, but I expected them to be gone after staining
(The person applying the stain did walk beyond a couple of times property a rag moisture from h2o, or holding the paint tray/brush with stain in information technology . A push mop with a rag tied around it with a string at each finish was also used to wipe the floor of any backlog stain. Not sure if any of this might be related)
My questions:
1. Whatsoever idea why the lines are there and how to set up information technology?
ii. What to do about the fuzzies and white balance – Will this become away on its own in a few weeks?
Give thanks you lot.
Last edited vii months agone by Due south.grand
Author
Respond to s.chiliad
1. Looks like roller marks maybe from grill or furniture. You cannot fix them exterior of removing all stain and starting over.
ii. No, information technology does non go away.
Answer to Deck Stain Assist
Hi,
1. At that place was actually a grill at that place with wheels that they moved, so that would brand perfect sense. I might demand to ask them to sand that department and re-stain there, volition that piece of work?
ii. Could you please analyze your second response – what does not become away, the fuzzies or the white balance/spots around the knots? What caused this and how exercise I ready it?
Thanks
Last edited 7 months agone past S.g
Author
Reply to s.thou
1. Y'all cannot spot fix, you lot would have to remove all and start over.
2. Aforementioned are #1 with the fuzzies and white remainder.
vii months ago
We stained our covered deck with oil based stain. It became very foggy and had tons of moisture on it. It dried in some areas merely is super "shiny" in others and seems sticky even so in the shiny areas. It's now been 5 days of nice weather. What do nosotros do….. thanks for your help!!
Author
Answer to Catherine McLeod
Remove excess stain with rags and mineral spirits. Saturate oily rags in water when done to avert spontaneous combustion.
7 months ago
Reply to Deck Stain Help
Is there a mineral spirits product you would recommend?
Author
Reply to Catherine McLeod
Any.
7 months agone
Reply to Deck Stain Help
Mineral spirits didn't work. Some parts are still "sticky" and shiny. What'south adjacent ? Do I accept to sand information technology? Could I put a clear sealing glaze over the whole thing and and then it will all just be shiny : )
Author
Reply to Catherine McLeod
You lot cannot top coat it. It volition arrive worse and information technology will peel. If information technology does not cure and dry on its own in a few weeks and so yous will have to remove it fully and start over.
7 months ago
Oh and I exercise plan to utilize one of your recommended brands when we redo next spring. Unfortunately I came beyond your website subsequently the fact! Oh well! Lesson learned!!
seven months ago
We live in western Washington state and applied Australian Timber Oil to our deck that has not been maintained since existence built about 14 years ago. Nosotros cleaned it and pressure washed information technology first and allowed it to dry. Of course it rained that night. The sections under the roof seemed to fair okay and are dry but the sections that got rained on are all the same kinda tacky. Even afterwards drying all the way. When it rained really difficult over the weekend the water seemed to seep into the stain and information technology created a yellow kinda film on the peak that I could scrape off with my finger nail. Is there anything I can do to get rid of the sticky parts to go along excess clay and crud from collecting over the winter? I know this is most likely a start over in the leap situation but it'd exist nice if it wasn't sticky all wintertime. Thank you for any advice. I'll attach pics of the dry deck. The lighter spots are where the xanthous film forms when information technology'southward wet.
Writer
Reply to Corrie Ariens
The only thing yous can practice is remove all and showtime over.
How-do-you-do, like story to others here: I recollect unexpected rain might accept messed up the deck seal nosotros applied. Either that or I was a bit heavy handed in applying the deck seal.
It's a new deck and we used Behr transparent deck seal. It rained perchance 6-8 hours subsequently we sealed the deck. It was overnight and then I couldn't tell how hard information technology rained simply there was water pooled on the deck the next morning.
Question is: should we force per unit area launder and re seal it or is it okay for the upcoming wintertime? What do you recommend?
Writer
Reply to Shannon
Send pictures after the rainwater has dried off for assistance on how to fix.
Respond to Deck Stain Help
Sorry I thought the pictures were loaded! Here they are.
Reply to Deck Stain Help
Notice in some areas the colour is more saturated and shiny despite information technology feeling completely dry.
Author
eight months ago
It rained very heavy and persistent the next twenty-four hours later on my first h2o based staining. When can I apply the recommended second coat.?
Writer
Reply to Maud O'Leary
That depends on the brand of stain and if you or cannot use another coat after it has cured.
eight months ago
How-do-you-do Support Team
I painted my garden boxes, inside and outside with Pure 100% Linseed oil and information technology rained 12 hours later. A real downwards cascade all day. It looks like the pelting has washed of most of the oil. When I started we were not expecting rain for iv or 5 days then am really upset that I accept wasted my time and money in painting the boxes with oil. Then what happens at present.? Practice I have to wait for them to dry to recoat.? The stain was applied to garden boxes not decking and then is the process the same as decking..
Writer
Reply to Doris Swansson
Strip information technology and redo information technology with a proper forest stain, not straight oil. Use TWP or Armstrong Clark stains.
viii months agone
Reply to Deck Stain Aid
I alive in Commonwealth of australia so not familiar with the TWP or Armstrong Clark stains. As they are garden boxes and I will be planting vegie and herb plants in them, and so are these stains food safe or will they leach into the soil and contaminate whatever plants are sown in them. I am new to garden boxes so not certain what to use to waterproof the inside of the boxes. Have read that Linseed or tung oil is best for this purpose whatsoever info would be gratefully appreciated.
Had a contractor come out to stain my decks and fence. He used Thompson'southward Water Seal on the fence and Cabot's Australian Timber Oil on the decks. Started to rain as he was finishing upwards and now take some white bubbly patches on contend and decks looks unevenly stained. Does he need to come back out to reapply?
Author
Respond to April
Yous will have to redo fully. Offset over.
Reply to Deck Stain Help
Like, restain everything all over once more?
Writer
Reply to April
As in yous volition have to remove the coatings first and then restain.
Reply to Deck Stain Help
Oh, no. 😓 Thank you for your help @ Deck Stain Assistance!
Final edited viii months ago past April
I power done & "sealed" this table with Thompson's Water Seal (oil based/clear). The first week the table looked fantastic. And so we had a hard rain about 3 weeks afterward staining and now have water spots. How tin can this exist fixed?
B4 sealing, We power done the tabular array & allow it dry >4 days. Water seeped into the forest, no beading.
Waited for dry days at seventy-80 degrees to apply stain. Applied one coat and permit it dry in shade 3 days(73 hours).
We started using the table. H2o beaded on surface and it looked perfect.
Now, three weeks mail stain, had a heavy rain a couple days agone. The table ow has water spots all through the h2o sealer.
What happened? How do we fix this?
Author
What do I do? Hither'south motion picture of white blotches and some still wet after 24 hrs.
Author
Answer to Lori
Pressure wash off the blotches and and so lightly recoat all.
Reply to Deck Stain Assistance
Give thanks goodness it's on the railings. I volition do that (pressure wash and then recoat). Thanks for your quick reply. Truly appreciated 😊
Here is the flick
Tin can anyone propose a remedy for this…this is the second coat of Cabot deck correct and information technology rained x after applying.
Author
Reply to Phil
You lot would have to recoat it.
I put a clear 'no nonsense' h2o based stain on my decking. Afterward beingness defenseless out with rain shortly after the decking has left a cloudy / milky look in certain areas. Would another coat fix this?
Writer
Respond to Eamon
No, y'all would have to remove it and then utilise a proper stain.
10 months ago
I put downwardly a Thermory kiln dried bandbox deck, and am ready to coat it with their Cutek wood protecting oil. The Cutek says not to employ if woods contains more than 17% moisture, but I don't take a estimate, and really need to practise information technology today. It rained day before yesterday ( a midnight torrent), was dry out yesterday and today (sunny) – practise you think I'thousand good to get? (No rain in the forecast at present). Thanks!
Author
Reply to Jackie Tileston
It is well-nigh likley okay to stain.
11 months ago
I started staining my deck track and spindles today. Using Cabot solid color acrylic stain and sealant. Finished up for the day at 6pm. And theres a take chances of rain after midnight. Should I exist worried? Seems to be drying fast. Thank you
Author
Answer to Debbie Potter
Y'all should be fine.
- Contractors cleaned and re-stained our deck with Sherwin Williams SuperDeck semi-transparent oil based stain. It rained about 4 hours later, a quick downpour, and then cleared up. The water sitting on the deck made the expanse nether it await pinkish when the sun hits it (first moving picture) only looks perfectly fine when dry (third motion picture). I waited a full twenty-four hours (recommendations on the tin say not to apply within 24hrs of rain) afterward and put some more water on the area and got the same pinkish look under the sun, simply the wet deck out of the sun (second picture) looks normal . The contractor has agreed to come up dorsum and sand and refinish if we want, but I am wondering if that is necessary if the deck looks good when dry.
Author
Respond to Bob Daffer
I think you are fine and it merely has not fully cured however. I would not worry about information technology.
xi months ago
I oiled our new deck terminal calendar month with Intergrain universal timber oil. It rained the adjacent mean solar day about 9 hours later on. In that location were patches after the h2o stale.
I sanded it back when we had a few good sunny days and reoiled. It withal has patches and now has white marks on some boards. See pictures attached. Nosotros are in Australia and weather is cool
Author
Answer to Leanne grisold
You will need to remove and start over.
11 months ago
Respond to Deck Stain Help
Is the all-time way to sand it back once more to remove the stain or is in that location something else.
Author
Respond to Leanne Grisold
Sand or strip.
xi months ago
I looked on my conditions app and it stated no rain for the next vii days. I started staining a pine deck that is 6 months former. It started raining and I am so upset! I am using a solid stain from Behr. I am at a loss as what to do now. Any assist or suggestions would exist greatly appreciated. Give thanks you
Author
Reply to Lynette Borror
Allow it dry and and then recoat all over again.
I stained my deck two years ago and there was some rain spots on it afterwards it stale. How can I remove these water droplets? I am getting fix to resand my deck and would like any suggestions as to how to set up this problem. Cheers
Writer
Reply to Marc Hall
Yous cannot prepare this outside of sanding information technology down to the bare wood or coving with a new coat of solid stain.
We stained our deck about 2 years ago. I recollect there was some dew that formed overnight and it has since added to the rainspots on the deck. Delight look at the pictures and let me know if at that place is anything nosotros can do? Or whatever suggestions earlier I apply another new glaze of stain to the deck? Will restaining it make it get away?
Would using fans to help dry the freshly stained deck with unexpected rain help to go along stain from being displaced
Author
Answer to Edna Bourgoin
Probably not much if at all.
1 twelvemonth ago
How long later staining a argue will it be affected past rain?
Author
Respond to Dennis Reasner
Depends on the brand, blazon of stain, and how long information technology takes to dry. Non one respond for all.
1 year agone
We wanted to have the Pergola painted tomorrow with the sealer stain and sealer product and information technology's supposed to pelting on Tuesday I'm wondering if that is enough time in between to paint the Pergola without whatsoever damage
Author
Depends on the make, type of stain, and the temperature. No fashion to answer this exactly as all stains and atmospheric condition are different.
I used SW Super Deck IR reflective semi solid stain on my boat dock. It came a downpour about 4 hours after applying. In that location are a few blank spots at present and the rain didnt bead up like i thought information technology should. The bare spots dont concern me terribly as I tin can touch those upward but shouldn't the rain bead on Semi solid stains???
Author
Reply to Jon
Typically no, water should non bead off a deck stain. It sheds off if a breathable stain.
one year agone
What is the all-time brand of stain to use on your wood to protect it from the rain
Author
Reply to Theron Rutledge
It rained two hours subsequently finishing applying the terminal glaze.
Production used was Intergrain DWD
Writer
Reply to Lucas
You lot cannot spot gear up. You will demand to remove all and kickoff over.
I'thou in Northern California and the long, dry summer merely came to an end before getting to a new project using Sansin Stain. There is forecasted about a calendar week of articulate weather after a few days of pelting. But the morning dew can leave everything pretty moisture. I'm wondering if its alright to stain the projects, or try to reschedule for spring
Author
Reply to Aldo
Wating until Bound will be fine to prep and stain.
Forgot to adhere photos for the below post
Author
Reply to Leon
You will demand to remove it all and start over to fix this.
Nosotros stained our dorsum steps yesterday and according to the weather condition report were clear for rain within the 8 hour window the stain requires before it's waterproof. However a huge thunderstorm storm came in just as we were packing up last night.
I tried to put a tarp over information technology as best I could, given the situation, loud swearing and blasphemous the heaven was involved, merely a lot of h2o still got in.
We used Olympic Maximum semi-transparent stain + sealant.
Some parts are still tacky 22 hours later. Should I try and get covered once again before the next rain tonight or is the damage washed and I shouldn't carp? Will it get worse if information technology gets wet again at this stage?
Once the rain has left am I able to repair the damage or practise I need to beginning over again?
We may not have thought weather again until bound will information technology exist protected with what's on it now for wintertime?
Thanks for your help.
Howdy – Our deck is 12 years former, treated pine. The first time we stained the deck a few weeks ago, we start used Behr Wood Stain and Finish Stripper using a wire brush. Then we used Behr All In One cleaner to clean the deck. After 24 hours of drying we stained the deck using Behr Semi-Transparent Waterproofing Stain and Sealer. We did not realize it at the time but within 12-24 hours we had a weekend of rain (not hard) from a tropical tempest. The stain was peeling upwards in several places afterwards the weekend of pelting to our thwarting, and to further add insult, we ended up really not liking the color. We were virtually concerned about the peeling, so we ended upwardly using Behr Woods Stain and Finish Stripper and the wire brush once more to completely scrape the new stain off the deck. We did not use the All in In one case Cleaner this fourth dimension because we figured we had just used information technology and the wood should be make clean. It certainly looked make clean, cleaner than the offset time. We permit the deck dry out for a few days this time then practical a different colour of Behr Semi-Transparent Waterproofing Stain and Sealer a footling over a week ago. It had over 24 hours to all dry before pelting. Information technology rained this past weekend and the stain started immediately started peeling up. Y'all could walk out on the deck during the pelting and you could literally smear information technology with your anxiety. The attached pictures show what it looks similar now after it's stale for a few days. Seems to be getting worse. Do you know what most likely happened and what we should do? Cheers for your help!
Author
11 months agone
Answer to Deck Stain Assist
Male child yous are non kidding! We used Behr premium deck over on our south facing deck a few years agone, and information technology ruined the deck! Most boards are now rotted considering the deck over got little holes on the surface that trapped h2o underneath, information technology's awful!!! Nosotros have at present cleaned, sanded, and filled much of the damaged woods and nosotros'll be priming and painting the deck with Kilz porch deck and floor paint.
Light rain started just as we finished applying Pittsburgh Ultra Advanced Semi-Transparent to our cedar deck. Now information technology looks like this. What should we practice?
Author
Reply to Rob
Y'all will need to remove information technology all and starting time over. Strip and or sand. Brightner after. Probably volition need to exercise all floors so it looks even. The rails await okay.
ane year ago
We stained our Deck starting at 4:00pm yesterday (Friday) because we finally got a break in our weather and had 5 days prior for our wood deck to dry out. It looked good last night but this morning the deck looks horrible considering we have and then much to dew. We alive in Washington state and it is moist this time if year. Over the past couple months we tried to strip the paint using Smart Strip which was not successful, and we take sanded and pressure done multiple times to prep. We used Sherwin-Williams Super Deck paint with a an anti mildew additive concluding night (m-i advanced mildew handling). I have attached our weather condition forecast besides. Any suggestions? Wait untill spring to put on a 2nd coat or put a 2nd glaze on Sunday?
Author
Reply to Michelle Murphy
Await until Spring as you may have to remove the Super Deck.
Hullo. Five days ago we had our deck and boardwalk stained with a sprayer and so it started raining 3 hours afterward. It has rained intermittently since so. Water seems to exist pooling on both for long periods. Delight see photos fastened and advise whether to re-stain.
Writer
Reply to Omey
Transport pictures when the water dries off.
Respond to Deck Stain Assistance
H2o has dried off. Here are new photos. Thanks.
Answer to Deck Stain Assist
The h2o has stale off. Here are new photos. Thanks.
Reply to Omey
The h2o has dried off and here are new photos. Cheers.
Author
Answer to Omey
It is fine, go out equally is.
Hullo at that place,
I have a few questions to inquire you lot:
A. I spent a whole day staining the deck on Sunday but rain started last nighttime, Monday, at 8 pm. It lasted till around iv:30 am and the total book was about 20 mm. So the stain was let dry out between 26 to 36 hours earlier the rain. I got up at five:30 to wipe the deck and I could feel in that location was water beaded on tiptop, and the h2o in the bucket was kind of clear. Now at 12:30pm the deck is dry and I am taking some photos for you to see if there is water damage on the deck.
The stain I used was Cabot Australian Timber Oil honey teak. The label says drying time is almost 24 hours merely when I called, they recommended 48 hours no pelting.
B. It's sunny today simply it volition pelting again tomorrow morning. Should I comprehend the deck tomorrow? I was really thinking about covering the deck with plastic sheets terminal nighttime but pelting but started before I got to lay the plastic sheet on so I gave upwardly.
C. Another question is (see phone #iv), I found I missed some areas between the boards. Should I stain these areas? If stain bleed over to the areas already stained, will at that place be a problem? They say this oil is for one awarding but.
Thank you so much! I was so relieved when I found this updated postal service.
P.South. I am at Toronto and it is getting common cold at present. Roughly 10 at nighttime and 20 during daytime this calendar week.
Author
Respond to Angela Huang
Information technology looks fine, do not add together anymore stain as information technology will not dry correctly. No need to embrace tomorrow. We would not worry nigh touching upwards between the boards.
Reply to Deck Stain Help
Thank you for the quick response. Fastened a photo for the areas between boards. A little bigger than I'd similar to encounter. No need to touch up at all?
I take some very fine bristle brushes used for oil painting that can reach deep down there. I can try not to bear upon the areas already stained. Worth trying?
Author
Reply to Angela Huang
If you touch these spots up, wipe the excess off right away where information technology gets on the top of the board where it is already stained.
Hello. We stained our deck using semi-transparent acrylic/oil stain (Dulux; CWF-UV5). Because the weather forecast inverse to rain for the next week or and then nosotros paused the project.
Tin we cover the unfinished section of the deck with tarps? By unfinished I mean those areas that have been force per unit area washed and sanded simply Non seen any stain yet?
The stain has dried but some deck planks were halfway stained (i.e. half the length). Tin we just continue applying the stain in one case the weather is good once again/the wood is dry (trying non to overlap/overcoat the previously stained areas)? We might have to wait until next leap due to bad atmospheric condition forecasted.
Would we need to sand the deck over again if left covered past tarps throughout the wintertime?
Thanks!
Author
Reply to Tanya
Do non cover. If you stain this year, just brand sure y'all have ii days of drying. If you lot stopped in the middle of a lath, information technology volition not blend when y'all finish staining.
Reply to Deck Stain Assistance
Is it bad to linseed oil a trailer deck then cover it 2 days after to continue water off
Author
Answer to Erik
Information technology would non help and could create problems.
We cleaned the black mildew off of our mahogany deck using TSP substitute solution with bleach and a plastic-bristle brush, in accord with the cleaner directions (because power washing didn't remove the black). Information technology has been a very dry summer and the deck dried for 48 hours before we practical a coat of Benjamin Moore transparent Arbor Glaze. Despite a forecast of 3 more than dry days, information technology started to drizzle when we were well-nigh finished and information technology continued to rain lightly overnight and this morning. Information technology's dry now and information technology looks awful. What should nosotros do?
Writer
Respond to Judy
You will need to remove all and start over to prepare this. Strip off what you can, sand the rest, brightener last.
1 yr ago
I had my deck stain 3 days agone and it poured today at present it is all white. Can you tell me what to do please help
Writer
Reply to Jacquelin Forest
We would need pictures and also what stain brand and type that were used?
I stained my deck information technology rained two hours later on.. three days later it'southward withal tacky. Will it dry?
Author
Reply to Tiffany
Difficult to say. Depends on the brand and type of stain? Pictures would assistance as well.
Nosotros use TWP post-obit the instructions, now nosotros have some discoloration, some woods look dark and others lighter. Should nosotros utilize a more than TWP fabric on the calorie-free areas to unify the colour?
Author
Respond to James
Information technology is not possible to spot utilize and have information technology blend. You would have to recoat all.
Simply washed my deck with proper cleaner but now calling rain for 8 days or so, will I demand to wash it once more? Cheers.
Author
Answer to Yves
Yous should be okay every bit long as you stain within 2 weeks or so of the prep.
1 year ago
We ability done our deck. Before nosotros could paint information technology, moisture conditions moved in. That was about 3 weeks agone. Now the weather is groovy for painting. In that three weeks we agone walked on our deck. Do we need to rewash the deck before painting it?
Author
Answer to Susan Shreiner
Yes, rewash lightly.
Force per unit area washed and sanded our rather sometime mahogany deck. Applied Australian Timber Oil in Mahogany Flame. We had unexpected pelting almost 16 hours subsequently and it'due south lasted for 2 days. Now some boards are still beading but others look very apartment. With autumn apace approaching I was wondering if the deck would have enough protection for the wintertime and I could resand information technology and stain information technology in the autumn, or if information technology's completely shot and I demand to redo it this yr
Author
Reply to Alex
It is fine for the Wintertime. Clean and recoat next year.
Answer to Deck Stain Help
Thank you!
Hi I started the process of water sealing my forest fence with cabot articulate wood stain information technology hadn't rained 48 hours before and wasn't supposed to rain for 48 hours after nevertheless I alive in NC and the weather is all over the place and then the weather could telephone call for no rain and ten minutes later on information technology could change. I got 1/3 of the fence done and it started raining in the process 😠it had only been on for 30 minutes now I dont know what to do I am a novice at this. We had a good downwards pour for about 3 to 5 minutes and now I don't know if its ruined and if and then how practice I get nigh fixing information technology. Your assist is greatly appreciated! Cheers 😊
Author
Reply to Lara Horn
Note on Help with Rain on your Deck Stain
-Before asking a question if pelting harmed your deck, look until the rain stops and the water fully dries off the deck or woods. Make sure to mail service pictures.
Reply to Deck Stain Help
Hi here is a motion-picture show you were asking for 😊 I'm using Cabot clear wood protector on my backyard argue. It had merely 30min to dry when it started raining. Information technology rained pretty hard for nearly 3 to five minutes but this is normal weather here I never know if information technology volition rain or non the weather changes and then fast and then often. Whatever advice is profoundly appreciated!
Author
Reply to Lara Horn
Looks fine.
Sanded whole deck 80 grit , started to stain the deck and got one-half the deck washed then took a pause for about 6 hours , got back to information technology and almost finished the other half when a downpour started . My question is practice I but put a 2d coat where it looks ok , strip away what looks bad and pigment again ? Or do I strip whole deck with 80grit newspaper again and get-go over ? Should I resand the areas that weren't painted or volition it shine out again after it drys for few days ? This is a solid Color wood oil based stain , should I only do ii more layers on the areas that look like they lifted upwards ?
Respond to Allen
The boards definitely aren't smooth to the touch every bit they used to be , even where the paint didn't elevator seems to be slights rough and coarse again
Author
Answer to Allen
Rain will not damage anything. Merely continue to coat with the solid stain.
Reply to Deck Stain Help
Awesome thank y'all for the swift response ! So one time it dries the lifted paint isn't at risk for a peeling issue and information technology should smooth out again texture wise ? I loved how shine it was after the sanding so I'd hate for that to exist gone
Author
Answer to Allen
Information technology would not hurt to pole sand the crude areas before finishing it upwardly.
Nosotros have a 15 year sometime deck that had never been stained or sealed. Nosotros force per unit area washed and brightened information technology. On day one, we used Rustoleum deck get-go primer. Day ii nosotros began staining the floor of the deck with Cabot acrylic water based solid deck stain. We permit it dry for iv nearly five hours before it began raining. So far, it looks fine, but nosotros were planning to apply a 2nd glaze considering there are some areas betwixt the boards we missed and information technology looks slightly unfinished. Is this not a good idea once the deck dries out once again? We just don't desire it to peel if nosotros add too much stain and nosotros saw that yous said not to try "touch up" or "spot" staining.
Writer
Reply to Den
You tin can apply a second coat in one case it dries.
Source: https://www.deckstainhelp.com/it-rained-shortly-after-staining-what-to-do/
Pattie Lessel
1 calendar month ago
My deck has milky places all over information technology after the first rain after staining
It was several days and then I don't know what could have caused it
Please help